SERIN-CA Computer Controlled Advanced Industrial Servosystem Trainer ( AC motor )

1. SERIN/ CA Unit: The SERIN/ CA trainer consists on an Control Interface Box connected to a three-phase motor and to a PC. The control interface has a resolver for three-phase motors that controls the speed, position and current of the motor. The communication between the control interface and the PC provides the SERIN/ CA the possibility of commanding the motor from the PC and visualize the most important signals of the motor. Velocity, Position and Torque Control. It allows predefined moves and programming.Control Interface Box: Front panel: 3 Digital outputs: They have a green LED that indicates if the output is active or not. Emulative encoder outputs: two pair of outputs ( CH A Out, CH B Out and their respective denied outputs) that are TTL signals of incremental position generated by the resolver feedback, and one pair of outputs ( CH S Out and their denied) that TTL works as marker of pulses. Analog output 4 ( relay) . Analog outputs of the DAC monitor: these analog outputs are monitored points of general character. 6 digital inputs for those signals that are introduced to enable the different available functions in the software. 6 buttons to enable the digital inputs. 6 switches, with the same function as the buttons, but with the only difference that they are switches. Switch outfitter of digital inputs: there is a switch that enables the digital inputs. Analog input: this input allows an analog use directly of the user. It is an A/ D input. Voltage supply: 3 sources of D.C. in the unit ( + 24 V. , + 12V., and -12V. DC.) 2 Potentiometers. Back panel: Voltage supply ( 220 V A.C.) . Three-phase output when solving: it is a three-phase output that feeds when you are solving and, therefore, allows their movement. Connection port in series: to connect the unit with the PC by the port in series. Connection with the feedback: it is a connection with the motor feedback. It allows the encoder to manage the motor. Motor: AC motor, 0.7kW, 2.8A ac, 4200 rpm, 320V dc. Sensor RESOLVER : 1 Speed, 1X/ RX, 3 phase. 2. SERIN/ CA/ CCSOF.Computer Control+ Data Acquisition+ Data Management Software: Registration and visualization of signals in an automatic and simultaneously way. Flexible, open and multicontrol software. Management, processing, comparison and storage of data. Comparative analysis of the obtained data, after to the process and modification of the conditions during the process. 3. Cables and Accessories, for normal operation. 4. Manuals: This unit is supplied with 8 manuals. Dimensions ( approx.) = Unit: 490 x 330 x 310 mm. Weight: 40 Kg. Motor: 410 x 170 x 150 mm.Weight: 5 Kg.